5GHz WiFi not showing up on Windows 11/10

Download Microcomputer Repair Tool to quickly find & fix Windows errors automatically

The 2.4 GHz and 5 GHz numbers refer to two different "bands" that your Wi-Fi can use for its signal. Some PC users that install a modem with two bandwidths, 2.4GHz and 5GHz, which the product manual indicates that the gimmick is compliant, mightiness notice later on facility that the Windows 10 computer detects only the 2.4Ghz and non 5GHz WiFi bandwidth. In today's post, we volition attempt to identify why some users might play this issue.

Windows 11/10 detects only 2.4Ghz & not 5GHz WiF bandwidth

The principal differences 'tween the two frequencies are the cast (coverage) and bandwidth (zip) that the bands provide. The 2.4 Gigahertz band provides reporting at a longer range but transmits data at slower speeds. The 5 GHz ring provides less reporting but transmits data at faster speeds.

The range is lower in the 5 GHz band because higher frequencies cannot penetrate solid objects, much equally walls and floors. However, high frequencies set aside data to be transmitted faster than lower frequencies, so the 5 GHz band allows you to upload and download files quicker.

Your Wireless local area network connective on a particular waveband can also be faster or slower because of interference from other devices. Many WiFi-enabled technologies and other menag devices use the 2.4 GHz stripe. When multiple devices attempt to use the same radio space, overcrowding occurs. The 5 GHz circle tends to have inferior overcrowding than the 2.4GHz band because fewer devices utilise it and because it has 23 channels for devices to use, patc the 2.4GHz circle has only 11 channels.

5GHz Wireless local area network not showing up connected Windows 11/10

This subject is caused by two main reasons.

You power live this ascribable device driver issues. So before you do anything else, it's suggested that you update the modem driver firstborn.
The different possible reason is that your computer Crataegus oxycantha non have 5GHz bandwidth potentiality. You can stoppage it by following the stairs below.

Plunge Command Prompt (press Windows central + R. In the Run dialog box typecast cmd and hit Enter).

In the Command Prompt windowpane, copy and glue the command below andhit Enter.

netsh wlan show drivers

Look for the Radio receiver types suspended section.

If the output shows 802.11n 802.11g and802.11bnetwork modes as highlighted in the mental image supra, information technology substance the computer has 2.4GHz electronic network potentiality only if.

Also, if it shows that the network adaptor supports 802.11g and802.11n network modes, it substance that the computer has 2.4 GHz meshwork capability only.

But, if it shows that the adapter supports 802.11a and802.11g and802.11n network modes, it agency that the computer has 2.4 GHz and 5GHz mesh capability.

Hope this post was informative.

Obinna Onwusobalu, has studied Data & Communication Engineering and is a slap-up follower of the Windows ecosystem. Helium runs a computing device software clinic. He says information technology's best practise to create a System Restore Point ahead qualification any changes to your PC.